Ice Eater

Author: Mock Webware |

Ice Eater

Ice Eater Mascot

Ice Eater –40-years, the trusted deicer to protect assets and prevent winter fish kills!

The Power House Ice Eater venturi shroud (housing) with outwardly flared ends is designed to prevent ice from forming around any structures, walls or boats and keep an opening in the ice. By providing a continuous flow and circulation of warmer subsurface water up to the surface the ice-eater prevents thick ice from forming and keeps an ice-free open area protecting your assets before the ice sets!

The Ice Eater provides more upward thrust & draws warmer water from greater depths than other conventional de-icers. Ice Eater deicers are designed to be used in the harsh Canadian climate and are used across Canada.

The units are hung from the end of the dock, a boat house or any structure about 3 feet under the surface and can be pointed up for a large round opening. They can also be suspended at an angle to make an elongated ice opening for a boat or waterway or any structure. Used in freshwater or salt water.

By de-icing and keeping an opening in the ice the Ice Eater also allows oxygen to enter and be absorb in the water and helps sustain fisheries.

Ice Eater applications

  • Marina
  • Water intake
  • Pier
  • Boat lift
  • Dock
  • Pump intake
  • Canal
  • Power dam
  • Dam
  • Boathouse
  • Wall
  • Waterfowl Hunting
  • Barge
  • Boat
  • Waterway
  • Oyster Farm and FLUPSY

8 Ice Eater Models

IceEater_InAction2

Ice Eater is shipped complete with suspension lines and shackles. Therefore, it can be taken out of the box, hung from a boat,dock, or pier and plugged in.
Unlike other de-icing units, Ice Eater requires no additional hardware to obtain the desired de-icing pattern. Just move a shackle from one hole to another hole on the top rim, and you can quickly change the angle the Ice Eater is suspended at.
The average operating depth of the Ice Eater is between two and three feet, but for best performance, ensure there is at least one foot between the Ice Eater and the seabed.

  • Custom Designed and Engineered for maximum efficiency and performance in all climates.
  • Agitates more fresh-water & salt-water than any other de-icer on the market.
  • Patented heavy duty PVC Venturi Housing designed for superior water flow and protection of the motor and propeller
  • Bronze End-bell ensures a long life without cracking or warping.
  • Quick Disconnect Power Cord allows for easy replacement.
  • Environmentally Friendly Dielectric Lubricating Fluid is non-toxic and biodegradable.
  • 3-Year Warranty –Best Warranty in the Industry

Also available are our Ice Eater heavy duty easy installation dock mount.
The dock mount has several different angle settings and can be mounted vertically or horizontally.

Ice Eater Comparison Guide
Ice Eater Model Motor HP Voltage Running Amps Thrust Typical Open Area*
P250 1/4HP 115V 2.5 20lbs ~20' to 25' Diameter
230V 1.25
P500 1/2HP 115V 5.0 28lbs Up to 40' Diameter
230V 2.5
P750 3/4HP 115V 4.7 32lbs Up to 60' Diameter
230V 2.35
P1000 1HP 115V 7 36lbs Up to 80' Diameter
230V 3.5
* These are approximate guidelines. Many factors such as wind, temperature variation, location, will impact the opening area. There is no way to determine an exact surface area opening per Ice Eater.

Ice Eater



READ MORE BLOG ARTICLES